dji PHANTOM 4 PRO+ 사용자 설명서 - 페이지 16

{카테고리_이름} dji PHANTOM 4 PRO+에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji PHANTOM 4 PRO+ 20 페이지.
dji PHANTOM 4 PRO+에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

1. Flight Controller

Phantom 4 Pro/Pro+ User Manual

Smart RTH

Use the RTH button on the remote controller (refer to "RTH button" on page 33 for more information) or

tap the RTH button in the DJI GO app and follow the on-screen instructions when GPS is available to

initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point. You may use

the remote controller's control sticks to control the aircraft's position to avoid a collision during the Smart

RTH process. Press and hold the Smart RTH button once to start the process, and press the Smart RTH

button again to terminate the procedure and regain full control of the aircraft.

Low Battery RTH

The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that

may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately

when prompted. The DJI GO app will display a notice when a low battery warning is triggered. The

aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The

user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds

for these warnings are automatically determined based on the aircraft's current altitude and distance from

the Home Point.

The aircraft will land automatically if the current battery level can only support the aircraft long enough

to descend from its current altitude. The user can still use the remote controller to alter the aircraft's

orientation during the landing process.

The Battery Level Indicator is displayed in the DJI GO app, and is described below:

Critical Low battery level

warning(Red)

Battery Level

Remark

Warning

Low battery

The battery

level warning

power is low.

Please land the

aircraft.

level(Green)

Low battery

level warning(Yellow)

Power requires

to return home

Battery level Indicator

Aircraft Status

Indicator

Tap "Go-home" to have the

aircraft return to the Home

point and land automatically,

or "Cancel" to resume normal

Aircraft status

flight. If no action is taken,

indicator blinks

the aircraft will automatically

RED slowly.

go home and land after 10

seconds. Remote controller

will sound an alarm.

12:29

DJI GO App

Flight Instructions

Fly the aircraft

back and land

it as soon as

possible, then

stop the motors

and replace the

battery.