dji Focus 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} dji Focus에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Focus 2 페이지. Accessory support frame
dji Focus에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Attaching the Neck Strap

Insert the neck strap connector while pulling on the button.

Ensure the neck strap is attached securely.

●

Settings

Turn on the remote controller by holding down the power button for 2 seconds.

The Focus Remote Controller controls the focus of the Zenmuse X5 by

default. To enable aperture control, select 'Menu (right key) > Aperture > On'.

50.0%

Once aperture control is enabled, the 'D' button is used to switch between focus

control and aperture control. To switch from focus control to aperture control, press

the 'D' button and then follow the instructions in the DJI GO app to operate the

focus wheel.

The remote controller overrides the in-app controls. You will not be

●

able to adjust the focus or aperture in the DJI GO app.

Enter Menu

D Button

Using with the Zenmuse X5

To allow the Focus Remote Controller to control the focus and aperture of the Zenmuse X5, connect the

communication port on the Focus Remote Controller to the CAN Bus port on the Inspire 1 remote

controller using the dedicated CAN Bus cable.

Ensure that the Zenmuse X5 camera is set in AF mode.

●

In the DJI GO app, ensure that the shooting mode is set to 'M' (Manual mode) or 'A' (Aperture priority).

●

Basic Operation

Turn the focus wheel to control focus

or aperture of the lens.

For more information, read the user manual:

http://www.dji.com/product/focus/download