FITNESS AUDIO DX6-DR 운영 매뉴얼 - 페이지 7
{카테고리_이름} FITNESS AUDIO DX6-DR에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FITNESS AUDIO DX6-DR 16 페이지. Dual-channel three redundancy digital wireless microphone system
페이지 인쇄
Setting microphone's sensitivity from the receiver
1
Press SET button to make the sensitivity level flashes
2
Press DOWN(▼) and UP(▲) button to adjust the sensitivity level between -1, 0 and 1.
3
After a level is chosen, wait about 5 seconds to save the setting and the level will not
change after reboot until the setting is changed again.
1. Setting the sensitivity of the LAVALIER and HEADSET MICROPHONE of the beltpack
transmitter
Sensitivity value
Dynamic range
Noise & feedback
Mic cartridge to mouth
2. Setting the sensitivity of INSTRUMENT input of the beltpack transmitter
Sensitivity value
When to choose
Function
Important:
◼
The farther distance from mouth the higher sensitivity is required. The default gain level is 0.
◼
Higher sensitivity will lower the dynamic range of input signals, which may result in more
feedback concern.
◼
Above description is for reference only. Please set the sensitivity at a proper level when
operating the microphone system.
SYNC
SYNC
-1
high
low
< 10 cm
-1
Instrument input
level too high
Decrease input level
SET
→
SET
0
middle
middle
10 cm to 20 cm
0
default
default
6
Instructions
1
low
high
> 20 cm
1
Instrument input
level too low
Increase input level