FITNESS AUDIO M-209C 운영 매뉴얼 - 페이지 4

{카테고리_이름} FITNESS AUDIO M-209C에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FITNESS AUDIO M-209C 8 페이지. Fitness audio wireless mic system
FITNESS AUDIO M-209C에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지), 운영 매뉴얼 (6 페이지)

4. THE BELT-PACK TRANSMITTER
Channel Selection and Gain
Insert the battery bottom first. The
channel selector and gain adjustment are
located under the battery cover as shown
in the picture below. To make channel
selection (U-Series only) remove the cover
and select a channel by turning the
Channel Selector (6) with a small
screwdriver. Gain adjustment for lavalier
and headset microphones can be done by
adjusting the MT trimpot (5), whereas GT
trimpot (4) is for the gain adjustment of
an electric guitar or other high impedance
line level inputs. When you turn the
transmitter ON (1) you will see a single
flash(2) if the battery is charged and ready
to use. Should you see a continuous red
light then the battery is about to fail so
please change it for a new one. If you're
using the transmitter with the latest
Aeromic, Cyclemic or E*Mic then make
sure the MT trimpot is turned up to the
maximum.
Due to minor variations in the casing sizes of many brands of 9V batteries, the transmitter
battery compartment of the SM-716 is designed to accommodate the preferred 9V size
battery made by Eveready - the Energiser 9V Alkaline – but other brands may also work well.
Re-chargeable Ni MH batteries @ 170-190mAH ratings may need to be re-charged after
about 1.5 – 2.0 hours of continuous use, whereas alkaline 9V batteries will generally be
suitable for about 6 – 8 hours of airtime with the Aeromic or E•Mic/V•Mic wireless
microphones.
We recommend the use of an Aeromic Pouchbelt to hold the transmitter around your waist
or arm to protect your investment. A range of transmitter pouchbelts in different styles and
colours are available. For more details please consult your FA System supplier.
Pouchbelts shown L - R: Standard, Hipster, Zipster, Grey Zipster, Beige Theater belt.
Wireless Microphone System Operating Manual
4
1. Battery Status Indicator
2. Power Switch
3. Microphone Connector
4. GT Trimpot
5. MT Trimpot
6. Channel Selector