dji OSMO MOBILE 6 사용자 설명서 - 페이지 8
{카테고리_이름} dji OSMO MOBILE 6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji OSMO MOBILE 6 19 페이지.
dji OSMO MOBILE 6에 대해서도 마찬가지입니다: 안전 매뉴얼 (15 페이지)
페이지 인쇄
Using Osmo Mobile 6
On-board Features
Status Panel
Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.
System Status Indicator Descriptions
Blinking Pattern
Pulses red
Solid yellow
Solid green
Pulses yellow or green
Blinks red and green alternately Firmware updating/firmware update failed
Solid red
Battery Level Indicator Descriptions
Blinking Pattern
Blinks red quickly
Solid red
Solid yellow
Solid green
Gimbal Mode
Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement
of the grip. Suitable for scenarios when moving up and down or on a slant.
Tilt Locked: only the pan axis follows, where only the pan axis follows the movement
of the grip. Suitable for scenarios such as arc shots or moving from left to right.
FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the
grip. Suitable for shooting the first-person view.
SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis
rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is
suitable for shooting push, pull, and down.
8
©
2022 DJI All Rights Reserved.
Descriptions
Magnetic is not aligned
Bluetooth disconnected
Bluetooth connected
Standby mode
Abnormal status detected
Battery Level
≤5%
6%-19%
20%-60%
>60%
M Button
When powered off
With the gimbal folded, press once or press and hold: check the
battery level
With the gimbal unfolded, press once: power on
When powered on
Press once: switch between gimbal modes
Press three times: enter standby mode (press any button to exit)
Press and hold: power off. Press and hold for 20 seconds to force
power off