AIMS Power LiFePO4 LFP12V50B 사용 설명서 - 페이지 10

{카테고리_이름} AIMS Power LiFePO4 LFP12V50B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIMS Power LiFePO4 LFP12V50B 13 페이지.

BLUETOOTH INSTRUCTIONS

By downloading the Android™ or Apple® app on your smartphone or tablet, you can monitor the following

information:

Battery Voltage

•

Battery Current (Amps)

•

Battery Charge Status(SOC)

•

Charge/Discharge State

•

Battery Cycles

•

Battery Temperature

•

Remaining Capacity (RMC)

•

Design Capacity (DCAP)

•

Full Charge Capacity (FCC)

•

Average Time: Empty/Full

CONNECTION TO THE BATTERY

Make sure you have the latest version of AIMSBATB app that can be found on Google Play for Android and the

App Store for Apple (IOS). Turn on your Bluetooth. Tap the AIMSBATB icon

for all AIMS' smart batteries within range of your Bluetooth device and a list of batteries will appear. If your

batteries are not listed, move closer to the battery location and swipe your finger from top to bottom on the APP.

This will refresh the screen. Once the battery list is displayed, tap the battery for more information. You can also

search the battery's serial number if your battery bank has several batteries. The serial number is located on the

battery. Note: The app can only communicate with one battery at a time. You must disconnect from one battery to

connect to another one (go back to the battery list screen). Also, if any device (such as cell phone or tablet) is

connected to a battery, no other device can connect to that battery until the first device disconnects.

NOTE: Screens and data displayed in this manual may change as we continue to make updates to the app

as needed.

to open the app. It will search