dji TB55 유지 관리 매뉴얼 - 페이지 8
{카테고리_이름} dji TB55에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji TB55 11 페이지. For m200 series drones
dji TB55에 대해서도 마찬가지입니다: 사용자 매뉴얼 (3 페이지)
페이지 인쇄
For aircraft with a dual-battery design such as the M300 RTK and M200 Series, mark two
batteries as a pair and continue using them as a pair (charge and discharge them together) to
maximize the service life and ensure flight performance. Using this method the pairs will
maintain very similar internal resistance.
In a low-temperature environment, the TB60, TB55, TB50, and M2E batteries have a
self-heating feature. Once the battery is installed on the aircraft and the power is turned on, if
the battery's temperature is low, it will automatically self-heat to keep the temperature at about
60.8°F to 68°F (16 °C to 20 °C). However, this self-heating will consume the battery power so
the flight time will be reduced. Therefore, to maximize flight time or when using batteries without
a self-heating feature such as the Phantom 4 models, it is suggested to heat the battery with an
external heat source such as warm air inside a vehicle.
The self-heating function for equipped batteries can also be manually turned on by pressing and
holding the power button (see below chart). This will keep the battery at an ideal temperature
range for 30 minutes. The self-heating function can be turned off by holding the power button.
Battery Type
To Turn Manual Self-Heating On
TB60
Hold for 5 seconds
TB55
Hold for 4 seconds
TB50
Hold for 4 seconds
M2E
Hold for 5 seconds
To Turn Manual Self-Heating Off
Hold for 5 seconds
Hold for 2 seconds
Hold for 2 seconds
*Battery will maintain an ideal
temperature for 20 minutes