dji Zenmuse X5 사용자 설명서 - 페이지 18

{카테고리_이름} dji Zenmuse X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Zenmuse X5 18 페이지. For inspire 1 pro
dji Zenmuse X5에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (11 페이지)

페이지 인쇄

INSPIRE 1 PRO User Manual

Preflight Checklist

1. Remote controller, aircraft battery, and mobile device are fully charged.

2. Propellers are mounted correctly and firmly.

3. Micro-SD card has been inserted if necessary.

4. Gimbal is functioning as normal.

5. Motors can start and are functioning as normal.

6. DJI GO app connected to the aircraft.

Calibrating the Compass

Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so. Observe

the following rules when calibrating your compass:

1. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as

magnetite, parking structures, and steel reinforcements underground.

2. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.

3. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong

interference after calibration is complete. Follow the prompted instructions to resolve the compass

issue.

Calibration Procedures

Choose an open space to carry out the following procedures.

1. Ensure that the compass is calibrated. If you did not calibrate the compass as part of your pre-flight

preparations, or if you have moved to a new location since the last calibration, tap Aircraft Status

Indicator bar in the app and select "Calibrate", then follow the on-screen instructions.

2. Hold and rotate the aircraft horizontally 360 degrees, and the Aircraft Status Indicator will display a

solid green light.