1 Sound Tower Series 설치 매뉴얼 - 페이지 11

{카테고리_이름} 1 Sound Tower Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1 Sound Tower Series 16 페이지.

Figure 20. The wall-mount plate of the LCC44/84

Wall Bracket

Figure 21. Marking the mounting surface for

drilling.

• When it has been verified that there is no wiring or plumbing

in the wall behind the mounting position, use the plate itself

as a drilling template and mark with the pencil the centers and

outlines of the mounting holes. A spirit level can be useful to

assure that the mount is properly leveled.

| 3 - INSTALLING LCC44/LCC84 ON A WALL MOUNT BRACKET

Figure 22. Drilling the mounting holes .

• Drill the four holes, using a drill or percussion drill with a bit

approriate to the substrate material (masonry/concrete, wood,

steel etc.) with the appropriate diameter and to the appropriate

depth for the anchor type being used.

• Once the four mounting holes have been drilled, clear them of

residue and verify the appropriate depth of each.

• Place the mounting plate against the wall in the correct

orientation (with the hole for the removed clevis pin on the

bottom) and align the four mounting holes centered on the

drilled holes.

• Insert the four screws or anchors directly through the mounting

holes in the plate, tightening the screw anchors with your fingers

only sufficiently to keep them in place.