dji Aeroscope AS-F1800 사용자 설명서 - 페이지 7

{카테고리_이름} dji Aeroscope AS-F1800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Aeroscope AS-F1800 16 페이지.
dji Aeroscope AS-F1800에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

dji Aeroscope AS-F1800 사용자 설명서
Aeroscope AS-F1800

Features

Features
Long-range detection
Quick detection
Easy installation
Support for multiple
antennas
Various data feedback
modes
Easy OAM capabilities
Error management

Operation and Maintenance

Modes
Online (Remote server)
Local (Assistant)
©
6
2018 DJI All Rights Reserved.
Descriptions
In an interference-free environment, signal reception range
may be vary when different antennas are used. When using
the omnidirectional antenna (3dBi), signal reception range can
reach:
Over 7 km for Mavic
Over 5 km for Phantom series
Over 3 km for Spark
The signal reception range is about twice as much as the
omnidirectional antenna when using the low-gain directional
antenna (8dBi) and about four times when using the high-gain
directional antenna (16dBi).
Aeroscope needs less than two seconds to detect an aircraft
and less than five seconds for real-time display via the remote
server.
Aeroscope can be installed and configured within half an hour.
According to the environment and applications, users
can select appropriate antennas to meet their coverage
requirements.
Both Ethernet and 2G/3G/4G wireless networks are supported.
You can update firmware, reset to factory defaults, check
system status, conduct self-testing, adjust settings, and more
with the remote server and local app.
The device will reset when a recoverable software error
appears, and it will send a failure warning when there is an
unrecoverable software error or hardware error.
Descriptions
Device management: All equipment status inquiries,
setting configuration, resetting, self-testing, and so on with
authorization.
Software management: Firmware updating and version
management with authorization.
Environment monitoring: Monitor electromagnetic interference
to support equipment deployment and maintenance.
Data record management: Review data history within a
particular length of time with authorization.
Similar to online mode. But it can be used on one device.