dji Aeroscope AS-F1800 사용자 설명서 - 페이지 6

{카테고리_이름} dji Aeroscope AS-F1800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Aeroscope AS-F1800 19 페이지.
dji Aeroscope AS-F1800에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

dji Aeroscope AS-F1800 사용자 설명서
Aeroscope AS-F1800

Indicators

LED1
LED2
LED3
LED1: Processor module status indicator
It is used to indicate the processor's working status.
Indicator
Green blinking
Yellow blinking
Red blinking
Solid on/off
Added two status when the firmware is updated to v03.00.00.23 or later.
Indicator
Yellow and red blinking alternatively
Green and red blinking alternatively
LED2: Network connection status indicator
It is used to indicate the connection status between the processor and server.
Indicator
Solid green
Solid red
Changed the solid green indicator and added five status when the firmware is updated to
v03.00.00.23 or later.
Indicator
Solid green
4
©
2018 DJI All Rights Reserved.
LED4
LED5
LED6
Description
Functioning normally or firmware updated successfully.
Checking consistency when powered on or updating firmware.
Firmware update failed.
Functioning abnormally.
Description
Connected normally and communicating with the monitor.
Disconnected from the monitor.
Description
Connected normally and communicating with the monitor via
Ethernet.
LED1: Processor module status indicator
LED2: Network connection status indicator
LED3: UAV information capture indicator
LED4: Type 3 receiver status indicator
LED5: Type 2 receiver status indicator
LED6: Type 1 receiver status indicator
Description
Wireless dialing in progress.
An abnormal SD card log was detected.