AIMS Power SCC11ARPM 빠른 시작 매뉴얼

{카테고리_이름} AIMS Power SCC11ARPM에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIMS Power SCC11ARPM 2 페이지. Solar charge controller

Quick Start Guide

Solar Charge Controller SCC11ARPM

Features

IP68 waterproof design

12V battery systems

Charges most battery types including lithium

PWM 2-stage charger

LED status indicators

PV MC4 input and output connectors

Extended leads for installation flexibility

1 ft input and 5ft output leads

Dimensions

2.5"

Solar Charge Controller

3.25"

Wiring Instructions

Use caution when wiring your solar system. Light creates live

power. To connect always connect the battery first, positive

then negative. Once battery is connected, attach solar panel.

To disconnect always disconnect the panel first, then battery.

AIMS Power recommends using 10 AWG waterproof PV wire

and good quality MC4 connectors. NOTE POLARITY.

The battery input cable includes MC4 connectors to keep

the charge controller waterproof. You can use an extender

1.12"

cable (MC4 to lug ends) for your application. If you don't

1.7"

need an extender, simply cut off the MC4 connectors on the

battery output cable and add lugs. Make sure all

connections are tight and are good quality.

Solar Charge Controller

1. Solar Input Cable & Connector

2. Battery Output Cable & Connector

3. Solar Charge Indicator

4. Battery Status Indicator