dji Inspire 1 1345LS 제품 정보 - 페이지 3

{카테고리_이름} dji Inspire 1 1345LS에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Inspire 1 1345LS 8 페이지. Propeller mounting plate kit

Propeller adapters, retaining rings and propeller mounting plates

marked with CW should be mounted on motors marked CW, and those

marked with CCW should be mounted on motors marked CCW.

The red spring pad must be mounted on CW motors, and the silver

one on CCW motors. DO NOT mix them.

Put the screws and other parts in the correct places during installation

and removal.

Apply LOCTITE 243 adhesive for secure installation.

Using mismatched screwdrivers will lead to screws with stripped

heads that won't be able to tighten.

1. Remove the screws securing the original propeller mounting plate on the

motors, and then remove the original propeller mounting plate and the spring

pad.

2. Insert the included screws and tighten to secure the propeller adapter on the

motor. To better secure the propeller adapter, apply LOCTITE 243 adhesive

onto the screws.

Propeller mounting plate

Spring pad

Propeller adapter