dji MATRICE 300 RTK 유지 관리 매뉴얼 - 페이지 11

{카테고리_이름} dji MATRICE 300 RTK에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji MATRICE 300 RTK 19 페이지. Dual gimbal connector
dji MATRICE 300 RTK에 대해서도 마찬가지입니다: 제품 정보 (17 페이지), 유지 관리 매뉴얼 (19 페이지), 사용자 설명서 (15 페이지), 빠른 시작 매뉴얼 (10 페이지), 제품 정보 (10 페이지)

페이지 인쇄

1. All the screws on the aircraft body are tightened,

Screws

especially the screws connecting the motor and

the carbon tube.

1. Detach the landing gear to check the three

screws as shown. There is no damage or crack

around the screws.

2. If there is any screw loose, remove it to clear

the remained glue on it, apply some LOCTITE

263 glue and attach it again.

Landing Gear

3. Recommended torque: 40~60N. (a manual

Base

screwdriver is also suitable)

4. Inspection method: move the lock to see the

screw is not loose, and that the landing gear

can be disassembled and installed as per

normal.

5. Follow the above steps to maintain and inspect

the other Landing Gear Base.

1. Ensure the screw is secure, as shown in the

illustration.

2. Ensure that the arm junctions are not damaged

or cracked. If there is any damage or crack,

Frame Arms

return to the factory for repair.

3. The arm sleeves can be tightened in place.

4. Ensure that the carbon tube and the arm shaft

connector are tightly attached together.

Frame Arm

1. There is no foreign object or damage on the

LEDs

surface.

MATRICE 300 RTK Maintenance Manual