Fitness Quest Edge 386da 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Fitness Quest Edge 386da에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fitness Quest Edge 386da 19 페이지. Dual action magnetic bike
페이지 인쇄
ASSEMBLY
Step 20 is for SINGLE ACTION MODE.
FIGURE 9
Step 20. Lower SLOT in
CONNECTING ARMS (23
RIGHT & 24 LEFT) onto
LOCKOUT ROD and slide
RETAINER (28) back over
LOCKOUT ROD to lock
CONNECTING ARM in
SINGLE ACTION MODE.
NOTE:
There are three ADJUSTMENT HOLES in each CONNECTING ARM (23 & 24). The CONNECTING
ARM comes attached to the END HOLE. The END HOLE puts the GRIP end of the HANDLEBARS
(21 & 22) closer to you, which is better for shorter people. The INSIDE HOLE puts the GRIP end
farther away from you which is better for taller people. To adjust, follow Steps 21 through 23.
21 RIGHT
HANDLEBAR
23
RIGHT
CONNECTING
ARM
FIGURE 10
FIGURE 9
29
HAIRPIN
COTTER
4
M8
WASHER
INSIDE
HOLE
PIVOT
PIN
FIGURE 10
Step 21. Remove HAIRPIN COTTER (29) and
M8 WASHER (4) from PIVOT PIN in
HANDLEBAR (21 RIGHT & 22 LEFT).
Step 22. Slide desired ADJUSTMENT HOLE, of
CONNECTING ARM (23 & 24) onto
PIVOT PIN of HANDLEBAR (21 & 22).
Step 23. Place M8 WASHER (4) over PIVOT
PIN and insert HAIRPIN COTTER (29)
through hole in PIVOT PIN to lock
in place.
END
HOLE
9
RETAINER
LOCKOUT
ROD
23
RIGHT
CONNECTING
ARM
28