dji ZENMUSE XT 2 사용자 설명서 - 페이지 5

{카테고리_이름} dji ZENMUSE XT 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji ZENMUSE XT 2 18 페이지. Thermal by flir
dji ZENMUSE XT 2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

Installation

Supported Aircraft

Matrice 200 Series

Mounting the Zenmuse XT 2

1. Remove the gimbal cap, as shown below.

2. Rotate the gimbal connector to the unlocked position and insert the gimbal. Rotate the gimbal

connector to the locked position, as shown below using the Matrice 200 aircraft as an example.

1 1

1 2

Ensure that the Zenmuse XT 2 is mounted securely. Hold the gimbal connector firmly and

apply a steady, firm rotating force when attaching or detaching the gimbal.

Ensure that the M200 series aircraft firmware version is 1.01.0900 or later. When mounting on

a M210 or M210 RTK aircraft, ensure that the Zenmuse XT 2 is mounted to gimbal connector I.

Ensure that the microSD card slot cover is firmly in place to prevent dust or moisture damage.

The Zenmuse XT 2 is a sophisticated device. Do not disassemble the gimbal or camera,

as this will cause permanent damage.

Matrice 600 Series

1 3