dji FOCUS CP.ZM.000238.02 사용자 설명서 - 페이지 6

{카테고리_이름} dji FOCUS CP.ZM.000238.02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji FOCUS CP.ZM.000238.02 12 페이지.

DJI FOCUS User Manual

System Status Indicator

The system status indicator is a white LED that is located on the remote controller.

Remote Controller

Solid light

Blinks quickly

(4 times per second)

Settings

The Focus remote controller will display the following information when it is connected to the

Inspire 1 Pro or Raw system.

[5]

Zenmuse X5 Settings

Aperture: Enable or disable aperture control.

Direction: The lens motor's direction of rotation – normal or reversed.

Default: Restore the default lens motor parameters.

Settings

Power Off: Idle time before the remote controller auto-powers off-10 min, 30 min, 60 min or never.

Endpoints: The upper and lower travel limits of the focus wheel. Turn the focus wheel to the

desired upper travel limit and select Set Point 1. Then, turn the focus wheel to the desired lower

travel limit and select Set Point 2. Turning the focus wheel from Point 1 to Point 2 will rotate the

camera focus by a full cycle.

LED Control: Enable or disable the LED and system status indicators on the remote controller.

Default: Restores the default settings for the remote controller.

About: Displays the current firmware version of the remote controller.

Description

RC is connected to the Zenmuse X5 and functioning normally.

/ Forced update.

RC is disconnected from the Zenmuse X5. / RC is charging.

50.0%

[1] Battery Level

[1]

[2] Focus Wheel Travel Percentage

[2]

[3] Focus Wheel Travel Bar

[3]

[4] Main Menu

[4]

[5] Connection Status