dji RC Motion 2 사용자 설명서 - 페이지 8

{카테고리_이름} dji RC Motion 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji RC Motion 2 17 페이지.

DJI RC Motion 2 User Manual

If the battery level is low, it is recommended to use a charger that supports 5 V, 2 A output

to charge the device.

• Make sure that the default output voltage of the charger is 5 V. Excessive voltage

will damage the device.

The table below shows the battery level LED statuses during charging.

LEDs

Linking

Preparation before linking:

1. Power on the aircraft, goggles, and motion controller.

2. Open the goggles menu. Select Status and make sure that the aircraft model displayed

at the top of the menu is correct. Otherwise, select Switch from the upper right corner

of the menu and then select the correct aircraft.

3. Make sure the aircraft is linked with the goggles.

Link the aircraft with the motion controller:

5V, 2A

Battery Level

1%-50%

51%-75%

76%-99%

100%