3idee smsng-ark 조립 지침 매뉴얼 - 페이지 2
{카테고리_이름} 3idee smsng-ark에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3idee smsng-ark 7 페이지. Vesa adapter
Important Safeguards
IMPORTANT - KEEP FOR FUTURE REFERENCE.
• This product should always be used in accordance with the specified safety instructions.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious
injury or damage to property.
• Observe the maximum ambient temperature of 45°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the
adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with
VESA adapter.
• The product is designed exclusively for mounting with a hole pattern of 200x200 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct
ergonomics.
⚠ CAUTION
Ensure that the device is switched off and disconnected from the power supply before
installation to avoid possible injury or damage.
1. Before First Use
Check the product carefully for possible transport damage and for the absence of accessories, such as
screws, which should be included in the scope of delivery.
⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are
inaccessible to children to minimize the risk of choking and other risks.
2.1 Maintenance
• It is recommended to check every three months that all screws are still tight. Also regularly check the
condition of all components of the product.
• Store the product in a cool and safe place, ideally at a maximum storage temperature of 50°C. To
ensure additional safety, the product should be stored away from children and preferably in its original
packaging.
• Avoid any vibrations and shocks so as not to impair the service life and functionality of the product.
2.2 Cleaning
Please read these instructions carefully and keep them for future reference.
If you pass the product on to third parties, these instructions should always
be included. Failure to follow these instructions may result in injury or
damage to persons or the product, for which we cannot accept any liability.
Assembly
instructions
2