dji POCKET 2 사용자 설명서 - 페이지 12

{카테고리_이름} dji POCKET 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji POCKET 2 17 페이지.
dji POCKET 2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

DJI Pocket 2 User Manual

Updating Firmware

The firmware of DJI Pocket 2 must be updated through DJI Mimo. A prompt will appear when new firmware is

available. Follow the on-screen instructions to update the firmware.

A microSD card is required to update firmware.

Make sure that the battery level of DJI Pocket 2 is at least 15% before updating firmware.

Storing DJI Pocket 2

Store the smartphone adapters in the cover. With DJI Pocket 2 powered off and in storage mode and the

microSD card slot facing upward, place DJI Pocket 2 into the cover as shown for safer transportation and

storage.

To prevent unnecessary gimbal damage, make sure to place DJI Pocket 2 into the cover correctly.

1. DJI Pocket 2 contains delicate components that may be damaged upon impact, which may cause the

gimbal to malfunction.

2. Make sure there is nothing obstructing the gimbal when DJI Pocket 2 is powered on.

3. DJI Pocket 2 is not water resistant. DO NOT use any liquid cleansers. Only use a soft, dry cloth to clean DJI

Pocket 2.

4. Keep DJI Pocket 2 away from sand and dust to safeguard the sensors and the motors.

5. When DJI Pocket 2 is not in use, it is recommended to use the cover to protect the universal port. Avoid

touching the universal port during use as it may become hot.

6. DO NOT cover or touch the heat dissipation area of DJI Pocket 2 as it may become hot during use. DJI

Pocket 2 will stop shooting if it starts to overheat.

7. Make sure to hold DJI Pocket 2 and your smartphone firmly when using the smartphone adapter to mount

your smartphone to DJI Pocket 2.