dji RS 2 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} dji RS 2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji RS 2 11 페이지.

To remove the lower quick‐release plate, toggle the lever to the unlocked position, and remove

the lower quick‐release plate while pressing the safety lock on the mounting plate.

4. Connect the camera control cable.

Choose a proper camera control cable according the camera type. Plug one end of the cable 连接

into the RSS port of the gimbal and plug the other end into the camera.

Balancing

Balancing is required before shooting. Before balancing, make sure to power on the camera if

using an optical zoom lens and to select the focal length if using a varifocal lens. Make sure DJI RS

2 is powered off or in sleep mode before balancing.

1. Balancing the vertical tilt

a. Unlock the tilt axis, and loosen the mounting plate knob.

b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure the

camera is not top or bottom‐heavy. If top‐heavy, move the camera backward. If

bottom‐heavy, move the camera forward.

c. Tighten the knob. The vertical tilt is balanced until the camera is steady while pointing

upward.