dji Agras T20P 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} dji Agras T20P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Agras T20P 15 페이지.

4. Drag the map and tap Add to add a point at the location of the crosshair.

5. Tap the field on the map to select it, tap

the route and land automatically.

6. Wait for the app to complete reconstruction. The reconstruction result, an HD map, will be displayed on the origial map.

After reconstruction, users can tap Field Planning and follow step 3 to 6 in the following section to add points and perform operations. Users

can also tap

and start a new aerial surveying operation.

Field Planning and Operation Performing

1. In Operation View, tap Mode button on the upper left corner and select Route in Spraying panel.

2. Select a field in the field list.

3. Select the method for adding points and type of point and add edge points, obstacle points, and round obstacles on the map. Tap

press R3 and save.

4. Tap the field to select it and tap

5. Set parameters such as margin of field, obstacle boundary safety distance, amount of spray, line spacing, flight speed, and spraying

distance. Drag

to adjust the flight direction of the route. Then save.

6. Tap

or press R3, set the Connection Routing and RTH Altitude and Connection Routing and RTH Speed in Pre-Task Auto Check,

and move the slider to start the operation.

● Only take off in open areas and set an appropriate auto-takeoff height according to the operating environment.

● An operation can be paused by moving the control stick slightly. The aircraft will hover and record the breakpoint. After

which, the aircraft can be controlled manually. Pay attention to aircraft safety when returning to a breakpoint.

●In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can be enabled in the

app. If the function is enabled and the aircraft detects obstacles, the aircraft will slow down and circumvent the obstacles and

return to the original flight path.

● Users can set the action the aircraft will perform after the operation is completed in the app.

More Operation Modes and Functions

Refer to the Agras T30 User Manual for more information about the A-B Route, Manual, and Manual Plus Operation modes and on how to

use functions such as Smart Supply Reminder, Operation Resumption, System Data Protection, and Empty Tank.

Specifications

Model

Dimensions

Total weight (without batteries)

Maximum take-off weight

or press R3, and move the slider to take off. The aircraft will perform aerial surveying along

or press R3.

3WWDZ-20A

2800mm × 3120mm × 640mm (with arms and blades

unfolded)

1560 mm × 1910mm × 640 mm (with arms unfolded and

blades folded)

1087mm × 620mm × 685 mm (with arms folded)

25.2kg

31 kg

57kg