dji OSMO ACTION 사용자 설명서 - 페이지 14

{카테고리_이름} dji OSMO ACTION에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji OSMO ACTION 16 페이지. Bluetooth remote controller
dji OSMO ACTION에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 빠른 시작 매뉴얼 (9 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

OSMO ACTION User Manual

Maintenance

Underwater Usage Notes

1. Make sure the battery and battery compartment are dry and clean before inserting the battery.

Otherwise, it may affect the battery contacts and waterproofing. Make sure the battery is properly

inserted during use. Note that if the battery is properly inserted, the orange marks on either side of

the battery cannot be seen.

2. Make sure the USB-C cover is clean and closed before using. Otherwise, it will affect the device's

waterproofing ability.

3. Make sure the lens filter cap is in good condition and undamaged. If there is any damage, replace

it immediately. Make sure the lens filter cap and lens are dry and clean. Sharp or hard objects may

damage the lens and affect the waterproofing. Make sure the lens filter cap is properly tightened

during use.

4. Osmo Action is not waterproof unless the battery is properly inserted, the USB-C cover is closed,

and the lens filter cap is attached.

5. Osmo Action can be used underwater at depths of up to 11 m. When using a waterproof case, the

maximum depth underwater is 60 m.

6. DO NOT jump into the water with Osmo Action.

7. DO NOT use Osmo Action in a hot spring.

8. Clean Osmo Action with water after using underwater. Allow it to dry naturally before using again.

Clean Notes

1. Clean the lens filter cap with water, a lens cleaning pen, a lens air blower, or a lens cleaning cloth.

2. Clean the lens with a lens cleaning pen, a lens air blower, or a lens cleaning cloth.

3. Clean the holes on the camera and ventilation area with water if there is any object inside before

usage. DO NOT poke the holes. Contact DJI support if they cannot be cleaned.

4. Clean the battery and battery compartment with a clean, dry cloth.

5. All the holes on Osmo Action have built-in waterproof material. DO NOT remove the waterproof

material or poke the holes. Otherwise, Osmo Action will no longer be waterproof.