dji Zenmuse X5 사용자 설명서 - 페이지 8

{카테고리_이름} dji Zenmuse X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Zenmuse X5 17 페이지. For inspire 1 pro
dji Zenmuse X5에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (11 페이지)

페이지 인쇄

ZENMUSE X5 User Manual

4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the

camera lens into the body of the camera.

5. Rotate the camera lens clockwise until you hear a click.

6. Rotate the Lens Lock counterclockwise to lock it.

7. Mount the Balancing Ring (or a filter) and the Lens Hood.

8. Insert the Micro SD card.

To remove the camera lens, power off the battery and then:

1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.

2. While holding down the Lens Release Button, rotate the camera lens counterclockwise to

detach it.

It is recommended to wrap the dust cover around the lens for aerial applications. The

DJI specified dust cover can be installed on the DJI MFT 15mm f/1.7 ASPH and the

Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. Purchase an appropriate

dust cover for the Olympus M.Zuiko Digital ED 12mm f/2.0 if necessary.

It is important to tighten the Lens Lock after attaching the camera lens, as this can

reduce the vibrations of the lens when the aircraft is moving in flight. Always loosen

the Lens Lock before attaching and detaching the camera lens.

A filter can be installed in place of the Camera Balancing Ring. Remember to use a

filter that fulfills the weight requirement.

The Lens Hood can only be installed on the DJI MFT 15mm f/1.7 ASPH or Panasonic

Lumix G Leica DG Summilux 15mm f/1.7 ASPH. DO NOT install the Lens Hood on

the Olympus M.Zuiko Digital ED 12mm f/2.0.

Balancing Ring (or Filter)

Lens Hood

Lens Release Button