dji Zenmuse X5 사용자 설명서 - 페이지 17

{카테고리_이름} dji Zenmuse X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji Zenmuse X5 18 페이지. For inspire 1 pro
dji Zenmuse X5에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (11 페이지)

페이지 인쇄

GPS Signal Strong

Zone

Restriction

Motors will not start.

If the aircraft enters the

No-fly Zone

restricted area in A mode but

P mode activates the aircraft

will automatically descend to

land then stop its motors after

landing.

If the aircraft enters the

Restricted-

restricted area in A mode but P

altitude flight

mode activates, it will descend

zone

to a safe altitude and hover 15

feet below the safe altitude.

Warning zone

No flight restriction applies, but

there will be warning message.

Free zone

No restrictions.

Semi-automatic descent: All stick commands are available except the throttle stick command

during the descent and landing process. Motors will stop automatically after landing.

When flying in the safety zone, aircraft status indicator will blink red quickly and continue for 3

seconds, then switch to indicate current flying status and continue for 5 seconds at which point

it will switch back to red blinking.

For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,

city centers and other special areas. Try to ensure the aircraft is visible.

Blinking Green

DJI GO App Prompt

Warning: You are in a No-fly

zone. Take off prohibited.

Warning: You are in a No-fly

zone, automatic landing has

begun. (If you are within 1.5 mile

radius)

Warning: You are in a restricted

zone. Descending to safe

altitude. (If you are between the

range of 1.5 mile and 5 mile

radius)

Warning: You are in a restricted

zone. Max flight height restricted

to between 10.5m and 120m. Fly

Cautiously.

Warning: You are approaching a

restricted zone, Fly Cautiously.

None.

INSPIRE 1 PRO User Manual

Aircraft

Status

Indicator

Red flashing

None.