dji ZENMUSE X5S 사용자 설명서 - 페이지 7

{카테고리_이름} dji ZENMUSE X5S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji ZENMUSE X5S 19 페이지.

Installing the Camera Lens

The following steps use the DJI MFT 15mm f/1.7-16 ASPH to demonstrate mounting a camera

lens to the camera body. Be sure to power off the battery before installation.

1. Remove the camera body cap.

2. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.

3. Remove the lens cap and rear cap.

4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the

camera lens into the body of the camera.

5. Rotate the camera lens clockwise until you hear a click.

6. Rotate the Lens Lock counterclockwise to lock it.

7. Mount the Balancing Ring (or a filter) and the Lens Hood.

1 4

To remove the camera lens, power off the battery.

1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.

2. While still holding down the Lens Release Button, rotate the camera lens counterclockwise to

detach it.

1 1

ZENMUSE X5S User Manual

1 2

Lens Release Button

1 6

1 5

1 3

1 7