Artila Matrix-512 사용자 설명서 - 페이지 13

{카테고리_이름} Artila Matrix-512에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artila Matrix-512 17 페이지. Linux arm9 industry box computer

Matrix-512 User Guide

4. Artila Utility Software

The introduction of Artila utility software as follow:

Update loader, kernel or root file system image. Also use update —FORMAT to format user disk.

Type update—help to find the command usage.

Update can only operated under supervisor mode (password: root).

Configure serial port setting. An example show as followed to configure port 1 as RS-485 interface

with baud rate 921600. Please note only port 1 support 9-bit data at RS-485.

gpioctl is used to control the programmable digital I/O port located on the DB25 connector. Following

example is to configure DIO1 as digital input and DIO2 as digital output with low output state.

‧9‧