Custom Crimp CC200 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Custom Crimp CC200에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Custom Crimp CC200 17 페이지. Dial micrometer style adjustment
Custom Crimp CC200에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지)

페이지 인쇄

CC200 / CC400

The AccuStop

coupling stop eliminates guesswork

allowing the operator to visually observe exactly where

the crimp will be positioned on the ﬁ tting without the

need for trial and error and product scrap due to poor

crimp positioning.

With the Coupling Stop retracted, load the appropriate

set of dies and set crimp diameters as required.

With the crimper in the MANUAL mode, bring the dies

to a fully closed position.

Loosen the Coupling Stop Clamp

and position the Coupling Stop

against the back face of the dies.

Position the ﬁ tting against the Cou-

pling Stop and actuate the crimper

in the normal manner.

General Production Hose Crimper

AccuStop

Coupling Stop

Clamp

Coupling

Stop Guide

Slide the Coupling Stop Guide

against the Coupling Stop Arm.

The dimension from the face of the

ﬁ tting to the crimp position will now

be the dimension established in the

previous step.

COUPLING STOP

Hold the ﬁ tting against the Coupling

Stop Arm withdraw the Coupling Stop

Rod such that the Guide is aligned

with the desired crimp position. Lock

the Coupling Stop Clamp.