djpower FLAME MACHINE HF-210 사용자 설명서 - 페이지 10
{카테고리_이름} djpower FLAME MACHINE HF-210에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower FLAME MACHINE HF-210 16 페이지.
페이지 인쇄10
Pressure Relief
Switch safety
11
lock to USER
MODE
12
Pressurize
13
Firing
14
Pressure Relief
Switch
15
lock
to
MODE
16
Power off
5.4.3.
Definition of positions
5.4.4.
Drive time for Effects
Time needed for the motor drives from NO.8 to relevant angle:
No.
NO.1
NO.2
NO.3
NO.4
NO.5
NO.6
NO.7
NO.8
NO.9
NO.10
NO.11
NO.12
NO.13
NO.14
NO.15
For example, it takes 90ms for the motor drives from 0°to 45° . When operator design a show to synchronize to music, this drive time must
be taken into account.
Under DMX control: Channel 6= 0~49 or 201~255.
Before switching to USER MODE, Please strictly follow the safety distance requirement, make sure no
human beings, no animal or no flammable objects are within the danger area.
Under DMX control: Channel 6= 50~200.
Under DMX control: Channel 3= 255.
Relief pressure when show finished or Wave flame machine will not be used for a long period. Under
DMX control: Channel 6= 0~49 or 201~255.
safety
TEST
Guarantee safety use for next time.
Power off Wave flame machine, tear down power cable and DMX cable, pack the device when it is
cooled down.
Angles
-105°
-90°
-75°
-60°
-45°
-30°
-15°
105°
0°
15°
30°
45°
60°
75°
90°
- 9 -
Drive time needed
170ms
150ms
130ms
110ms
90ms
70ms
50ms
0ms
50ms
70ms
90ms
110ms
130ms
150ms
170ms