djpower R-4 사용자 설명서 - 페이지 10

{카테고리_이름} djpower R-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower R-4 12 페이지. Confetti canon

4. USE

ATTENTION!

Before using the device for the first time, remove all packaging materials.

After checking that the device is intact and complete, please place it on a flat surface.

Fill the machine with confetti!

Connect the device to the mains.

Connect the device to a DMX controller.

Turn on the device.

Set the desired DMX address.

4.1

Control

It is operated via the display, the remote control or via DMX.

4.1.1 Manual control

You can control the machine manually using the "MENU" and "ENTER" buttons. If there is no DMX

signal, press "MENU" and "ENTER" at the same time to start the machine manually. To stop the

machine, press "MENU" and "ENTER" again at the same time.

4.1.2 Control via DMX

As soon as the machine receives a DMX signal, the machine can be set to the desired DMX address

via the display. Use the "UP" or "DOWN" buttons to increase or decrease the DMX value.

You can control the machine via the remote control if there is no DMX signal. To do this, press one of

the 4 buttons on the remote control. The LEDs on the machine light up in a different colour on each

button.