djpower WP-2 사용자 설명서 - 페이지 9

{카테고리_이름} djpower WP-2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower WP-2 17 페이지. Bubble fogger

WP-2 Bubble Fog Machine

4. First time setup

ATTENTION!

Before using the device for the first time, remove all packaging materials.

1. After checking that the device is intact and complete, please place it

on a flat surface.

2. Fill the tanks with fluid! Please only use the recommended fluids,

otherwise the device may be damaged and the guarantee will be

void.

3. Make sure that there is always enough fluid in the tanks.

4. Connect the device to the mains.

5. The device starts to heat up. This process takes about 3 minutes, during

which time "Warming up" is shown on the display.

6. The heating process is complete. "Ready TO Work" appears on the

display.

4.1. Control

It is operated via the display, the remote control or via DMX.

UP / TIMER

DOWN / VOLUME

ENTER / STOP

Calling up the menu structure to make

individual settings.

Select a menu item or increase a value.

Activate the timer.

Select a menu item or decrease a value. Start

manual ejection.

Confirm the selection or the setting made. Stop

manual ejection.

9 / 16