djpower djV PT-1500 사용자 설명서 - 페이지 8
{카테고리_이름} djpower djV PT-1500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower djV PT-1500 12 페이지.
djpower djV PT-1500에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)
페이지 인쇄Fog machine PT-1500 Art.No
4. Start-up
Attention!
Remove before start-up every packing material.
1. Fill the tank with fluid. Make sure that there is always enough fluid in the
Fill the tank with fluid. Make sure that there is always enough fluid in the
Fill the tank with fluid. Make sure that there is always enough fluid in the
tank.
2. Connect the device to the power supply.
Connect the device to the power supply.
3. The device starts to heat up.
The device starts to heat up. This process needs 4 min, while this, the LED
on the receiver lights red.
on the receiver lights red.
4. The heating process is fini
The heating process is finished. The LED on the remote or the
lights green.
4.1. Operation
The operation can be made by the wired or the wireless remote.
The operation can be made by the wired or the wireless remote.
The operation can be made by the wired or the wireless remote.
4.1.1. Wired Remote
Wired Remote
Connect the wired remote with the device by using the
Connect the wired remote with the device by using the INPUT "Manual
Controller".
1. LED
2. Fog button
Art.No.: 114082
up every packing material.
shed. The LED on the remote or the receiver
This LED lights green if the device is heated up
and ready to use.
This button activates the fog output.
This button activates the fog output.
8 / 12
min, while this, the LED
INPUT "Manual
green if the device is heated up