djpower DJV PT-1500V 사용자 설명서 - 페이지 4
{카테고리_이름} djpower DJV PT-1500V에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower DJV PT-1500V 12 페이지.
페이지 인쇄Fog machine PT-1500 Art.No
2. Intended use of the device
Intended use of the device
This device was developed for professional use on stages, in discos, theatres
This device was developed for professional use on stages, in discos, theatres
This device was developed for professional use on stages, in discos, theatres
etc. The device is only approved for a connection up to 230 V 50/60 Hz
vice is only approved for a connection up to 230 V 50/60 Hz
vice is only approved for a connection up to 230 V 50/60 Hz
alternating current and only for indoor use.
alternating current and only for indoor use.
Regular breaks during operation increase the lifetime of your device.
Regular breaks during operation increase the lifetime of your device.
Regular breaks during operation increase the lifetime of your device.
Avoid convulsions or any form of forceful impact during the installation or the
Avoid convulsions or any form of forceful impact during the installation or the
Avoid convulsions or any form of forceful impact during the installation or the
start up of the device.
Take care that no cables are lying around. You would endanger your own
Take care that no cables are lying around. You would endanger your own
Take care that no cables are lying around. You would endanger your own
safety and also the safety of a third party.
safety and also the safety of a third party.
It is not allowed to operate or store the device in an environment in which
It is not allowed to operate or store the device in an environment in which
It is not allowed to operate or store the device in an environment in which
spray water or rain is expected. Humidity or very high atmospheric humidity
spray water or rain is expected. Hum
could reduce the isolation of the device and could cause deathly electric
could reduce the isolation of the device and could cause deathly electric
could reduce the isolation of the device and could cause deathly electric
shocks.
If using fog machine you have to ensure that the fog saturation of the room
If using fog machine you have to ensure that the fog saturation of the room
If using fog machine you have to ensure that the fog saturation of the room
must allow a good visibility of at least 10m.
must allow a good visibility of at least 10m.
Operate the device not during thunderstorms. Surge voltages could destroy
e device not during thunderstorms. Surge voltages could destroy
e device not during thunderstorms. Surge voltages could destroy
the device. Unplug the power supply during thunderstorms.
the device. Unplug the power supply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
Surrounding objects or surfaces should not be in contact with the device.
Surrounding objects or surfaces should not be in contact with the device.
Make sure that during the installation and removal of the device the area
Make sure that during the installation and removal of the
below the place of installation is basically cordoned off. This also applies to
below the place of installation is basically cordoned off. This also applies to
below the place of installation is basically cordoned off. This also applies to
implementation of service.
implementation of service.
Make familiar yourself with the functions of the device before start-up. People
Make familiar yourself with the functions of the device before start
Make familiar yourself with the functions of the device before start
without the experience should not handle with the device. The most cause of
without the experience should not handle with the de
functional disorder is inappropriate handling.
functional disorder is inappropriate handling.
Keep the device away from children and never operate it unattended.
Keep the device away from children and never operate it unattended.
Keep the device away from children and never operate it unattended.
Never aim the nozzle on people a keep a distance from 50 cm to the nozzle.
Never aim the nozzle on people a keep a distance from 50 cm to the nozzle.
Never aim the nozzle on people a keep a distance from 50 cm to the nozzle.
ATTENTION. The ejected fog is very hot!
ATTENTION. The ejected fog is very hot!
Keep a minimum distance of 50 cm to other objects.
Keep a minimum distance of 50 cm to other objects.
Use only the recommended, high quality water-based fluid from your dealer.
Use only the recommended, high quality water
Other fluids may cause damages. Do not use flammable additives, such as
Other fluids may cause damages. Do not use flammable additives, such as
Other fluids may cause damages. Do not use flammable additives, such as
oil, gas, perfumes, etc. in your fluid.
oil, gas, perfumes, etc. in your fluid.
Never aim the nozzle on open fire or flammable objects.
ozzle on open fire or flammable objects.
Make sure to top off the fluid in time. If the machine operated without fluid it
Make sure to top off the fluid in time. If the machine operated without fluid it
Make sure to top off the fluid in time. If the machine operated without fluid it
can cause damages to the pump or the heating block. Before top off the
can cause damages to the pump or the heating block. Before top off the
can cause damages to the pump or the heating block. Before top off the
fluid please unplug the device from the power supply.
fluid please unplug the device from the power supply.
Never drink the fluid. I fit does happen, please contact a doctor. If the fluid
Never drink the fluid. I fit does happen, please contact a doctor. If the fluid
Never drink the fluid. I fit does happen, please contact a doctor. If the fluid
had contact with the eyes or mucous membranes, rinse immediately with
had contact with the eyes or mucous membranes, rinse immediately with
had contact with the eyes or mucous membranes, rinse immediately with
water bodies.
Operate the unit only in a horizontal position.
Operate the unit only in a horizontal position.
Art.No.: 114082
idity or very high atmospheric humidity
4 / 12
device the area
vice. The most cause of
based fluid from your dealer.