3Jtech NetCAMit 사용자 설명서 - 페이지 10
{카테고리_이름} 3Jtech NetCAMit에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Jtech NetCAMit 13 페이지.
페이지 인쇄http://www.3jtech.com.tw
http://www.pnpipcameras.com
netCAMit User's Guide
4. Reset Default
netCAMit provides "Reset Power" and "Reset Default" buttons that will be easy for users to reset
the camera. The buttons locate in the back of the camera (See 1 and 2 of the figure below).
No. in
Name on
Figures
netCAMit
SW_1
1
SW_2
2
Default Setting for netCAMit:
1)
DHCP
2)
If IP is not assigned within 30 seconds, the default IP then will become: 192.168.8.99:8299
3)
Public password: blank
4)
Supervisor password: blank
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
2
1
Description
Press SW_1 button then
netCAMit will do the power reset.
Press and hold SW_2 button for
5~10 seconds to reset the
camera to its factory defaults
N/A
The green indicator LED of RJ-45
port will light when it is finished with
the reset procedure.
10
Remark