DK Digital CDB-700 소유자 매뉴얼 - 페이지 8

{카테고리_이름} DK Digital CDB-700에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DK Digital CDB-700 13 페이지. Cd radio recorder

페이지 인쇄

1. General Operation

Radio operation

Move the function switch to the RADIO position. Select the desired frequency range

using the BAND switch.

For FM reception you need to pull out the telescope antenna on the rear side of the unit.

Turn the antenna to find the best antenna orientation.

For AM reception the device has a built-in antenna. If AM reception is noisy or distorted,

please turn the unit to find the best orientation.

Use the TUNING control to select the broadcasting stations. The frequency scale printed

on the top panel around the TUNING knob will help you to locate stations.

When receiving FM Stereo transmission, the FM ST indication is activated. For MONO

transmission or weak, noisy reception, put the BAND switch into FM position to improve

the sound quality.

Cassette operation

Do not use C-120 tapes or very cheap tapes. This may lead to malfunctioning and tape

spillage. Before inserting a tape please ensure that the tape reels run smoothly and that

there are no tape loops. Otherwise this might result in tape spillage.

The tapes are equipped with plastic clips which can be removed

to secure recordings against rerecording or erasing (see Fig.).

The resulting deepening may be covered with adhesive tape to

rerecord the tape.

ATTENTION!

When you have removed the erase protection, the record button will be locked and cannot

be pressed! These plastic clips are also removed in commercial music tapes.

Play Tapes

Put the function switch into the position TAPE - POWER OFF.

Press the button

tape with tape opening upwards into the cover bracket. The full tape reel should be on

the right side.

Carefully close the cover by slighting pressing down the cover of the cassette

compartment. Press the play

If you want to interrupt the playback for a short time only, press the

press this button again, the playback will continue.

You may discontinue the playback by pressing the

Fast Forward and Rewind

You can run forward and rewind the stopped tape. Use the

the

button for fast rewind. When you have reached the desired tape position, press the

button to stop the process. Never use the fast forward or rewind functions during

playback. This may cause damage to the tape.

Record Tapes

Put a cassette into the compartment: The side to be recorded must be visible from the

outside. The full tape reel has to be on the right side. Any previous recordings will be

. The cassette compartment opens, and you can insert a recorded

button . The tape will be played.

button.

button for fast forward and

button . If you