Custom Dynamics CCM-5BT 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} Custom Dynamics CCM-5BT에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Custom Dynamics CCM-5BT 9 페이지. Bluetooth remote
페이지 인쇄Bluetooth Control Interface Sync Instructions-Android & iPhone
1.
Make sure there is power going to the Remote Module.
2.
Download the phone App for the appropriate operating system. Follow the prompts on device. Consult the phone
manufacturer if unsure of this process. Keyword Search: CCM-5BT or Custom Dynamics®.
Note: Remote should be synced through the app only, do not attempt to manually pair devices through the device
settings.
3.
Open the App by touching the logo application icon, then sync the app to the receiver by tapping the "Scan" button.
A list of Bluetooth devices should pop up. Find the "CCM-5BT" device in the list and tap to select. The application
will confirm the connection. If the message reads connection failed or Disconnected, try the sync again. If remote
does not show up in the list of devices or has trouble connecting, try rebooting the phone, then check to make sure
Bluetooth function is enabled. Also, verify that power is getting to the remote module.
4.
Turn on the Lights with the interface by tapping the "On" button. When activated, the button will change color from
black to red. The "F1" button will also change to red to indicate function 1 - Single Color control is activated.
1
Open the app located in the
"APPS" section of phone.
4
Tap the bar that says "Scan for
Devices". (Droid Motorola devices
only - other users skip to #5 )
Questions? Call us at: 1 (800) 382-1388
Instructions - Page 5
2
Tap on the Scan button at the top
left under logo.
5
A list of available devices will be
displayed. Tap the screen to select
the CCM-5BT.
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
3
System Prompt pops up asking to
select a device.
6
Confirmation of connection will be
displayed at the bottom.
09-2017