Altronix NetWay spectrum NetWay SP1P 설치 매뉴얼

{카테고리_이름} Altronix NetWay spectrum NetWay SP1P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altronix NetWay spectrum NetWay SP1P 4 페이지. Powered media converter/injector

페이지 인쇄

NetWaySP1P

Powered Media Converter/Injector

Altronix NetWaySP1P converts 10/100/1000 Mbps ethernet to Fiber (1000Base-X/SX/LX)

and provides PoE.

Agency Listings:

• UL/cUL Listed for Information Technology

Equipment (UL 60950-1).

• CE approved.

Input:

• 24VDC @ 1.5A, 56VDC @ 0.75A (30W).

• 24VDC @ 1.0A, 56VDC @ 0.5A (15W).

Fiber Port:

• One (1) 1Gb SFP port.

• Use with SFP module 1000Base-X (1Gb),

compliant to Class 1 laser product

(not included).

Ethernet:

• IEEE 802.3at (30W) compliant.

• Wire type: 4-pair CAT5e and higher.

• Connectivity: RJ45, auto-crossover.

• Speed: 10/100/1000Mbps.

• Distance: up to 100m.

Unit is powered via 24VDC-56VDC. NetWaySP1P is not intended to be connected to outside

plant leads and should be installed indoors within the protected premises.

1. Mount NetWaySP1P in desired location utilizing the mounting hole (Fig. 1a, pg. 2).

Use a proper fastener and/or wall anchor when securing NetWaySP1P with screw through

its mounting hole to the wall.

2. Connect 24VDC-56VDC power source to terminals marked [24-56VDC – Input +].

Terminals accommodate up to 12 AWG wires.

3. Connect structured cable from port marked [PoE+ Output] on NetWaySP1P to a

PoE device (Fig. 2, pg. 2).

4. Connect fiber optic cable to a fiber SFP module. Connect the module to the port marked

[SFP] on the NetWaySP1P. Connect the other end of fiber cable to an SFP module of a

remote device. SFP LED will illuminate indicating data connection (Fig. 2, pg. 2).

All manuals and user guides at all-guides.com

Overview:

Features:

LED Indicators:

• Yellow and Green LEDs (RJ45 jack):

• Green Pwr In LED:

• Green PoE LED:

• Green SFP (Fiber) LED:

Environmental:

• Refer to Environmental Conditions on page 3.

Dimensions (W x L x H approx.):

Installation Instructions:

Installation Guide

IP Link status, 10/100/1000 Base-T/active.

Indicates unit is powered.

Indicates PoE present.

Indicates SFP connection.

3.375" x 3.8" x 1"

(85.7mm x 96.52mm x 25.4mm).

Rev. 070717

I.T.E. 43KC