DK SONIC DK-1500TS 사용자 설명서 - 페이지 8

{카테고리_이름} DK SONIC DK-1500TS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK SONIC DK-1500TS 9 페이지.

Advantage

Ultrasonic is widely used throughout industries to remove difficult contaminants from

the parts during or after manufacturing process which might require a stage of

cleaning before the next process. In general, if an item can be cleaned with liquid, it

can be cleaned much faster and more thoroughly with an ultrasonic cleaner. Compared

with traditional solvent/scrubbing, our ultrasonic cleaners:

Are more effective at removing contaminants;



Are quicker to get a good cleaning effect;



Save labor time of employees (and subsequent labor cost);



can heat the cleaning solutions to a suitable cleaning temperature so as to



enhance the cleaning efficiency;

Have a digital controller of high-precision and a long service-life;



Are of high performance;



reduce chemicals in the cleaned stuffs;



Are environment friendly because of its recyclability.



For Better cleaning effect:

Immerse the cleaned stuffs well into the water.

●

Add a small amount of cleaning solution is added.

●

Make sure that there is enough space around each stuff in the tank. The more

●

stuffs you place in the tank, the less efficiency you can get. It is not advised to

overlap stuffs because the ultrasonic cleaning system can not work well with

layered stuffs.

Use a basket. Do not put stuffs directly into the bottom of the tank because that

●

is harmful for the inner tank. So it is better to use a suitable basket. Especially a

metal basket only absorbs about 8% ultrasonic energy.

Choose a suitable temperature: Generally, the higher the temperature is, the

●

better cleaning effect the ultrasonic cleaner can make. However, when

temperature exceed 70℃～80℃, cleaning effect will be affected. So the best

temperature we suggest is 40℃～60℃.