Artison Sketch LCR DualMono MK 2 빠른 참조 매뉴얼 - 페이지 4
{카테고리_이름} Artison Sketch LCR DualMono MK 2에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artison Sketch LCR DualMono MK 2 4 페이지.
Artison Sketch LCR DualMono MK 2에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 빠른 참조 매뉴얼 (4 페이지), 설치 매뉴얼 (4 페이지)
페이지 인쇄
Fine Tune Speakers
To fine tune the A/V Receiver/Processor, set using the follow-
ing:
– Set Speaker to SMALL
– Set Crossover Frequencies
•
Dual Center = 80 Hz
•
Left and Right = 80 Hz
– Crossover Slope = 18 dB/octave or greater.
Mount Grilles
1. Position the tabs on the grille so they line up with the four
slots in each corner on the face of the speaker enclosure.
2. Apply with an inward pressure on each of the corners until
grille is set into position.
HELPFUL! The slots in the speakers are roughly
longer than the tabs in the grilles. When installing, ad-
just the grille up or down to align it with the TV before
pressing into position.
Custom Grilles
If grilles for your speakers have not already been ordered, an
online tool is available to assist you to custom design grilles
that fit your exact TV. Once designed, the custom designed
grilles can then be ordered. To access the Grille Designer tool,
go to
www.savant.com
and select the Store tab.
M-LCRDM-MK2 | 009-1625-01 | 190826
Copyright 2018 Savant Systems, LLC
Dimensions
1/4
inch
NOTE: Grilles will add .3 in. (.76 cm) to the
4
of
4
6.20 in.
(15.75 cm)
Includes
Bracket
29.6 in.
(75.18 cm)
2.5 in.
(6.35 cm)
overall depth of the speaker assembly.
2231 Meridian Blvd #1, Minden Nevada 89423
www.savant.com/artisonspeakers
2.0 in.
(5.08 cm)
13.625 in.
(34.61 cm)
30.6 in.
(77.72 cm)
| 775.783.4770