Artison RCC300-SA 설치 매뉴얼 - 페이지 6

{카테고리_이름} Artison RCC300-SA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artison RCC300-SA 15 페이지.

RCC 300 FREESTANDING SUBWOOFER (RCC300-FS)

SUBWOOFER PLACEMENT AND ORIENTATION

The RCC 300 Freestanding Subwoofer comes with four rubber feet to attach to the side of your

choice.

Carefully decide what placement and orientation are best for the subwoofer,

the

supplied rubber feet are not removable once applied.

The classical rule for subwoofer

placement is that the subwoofer should be placed near the same wall the front channels are

located, at one-third of the total distance of the wall. When using multiple subwoofers, consult

with your dealer or custom installer for best placement options. This subwoofer is not affected by

cabinet orientation and can be used either vertically or horizontally.

The normal vertical

orientation is with the terminal cup facing down. The rubber feet will allow clearance for the

speaker wire to fit underneath. If the subwoofer is placed horizontally, the rubber feet should be

applied to the corresponding bottom side of the cabinet.

SUBWOOFER SETUP

The RCC 300 Freestanding Subwoofer is to be used in conjunction with the RCC 300 Subwoofer

Amplifier. On the rear of the amplifier in the SETUP section, the EQ switch should be set to the

CLOSED BOX setting.

SUBWOOFER GRILLE INSTALLATION

The grille for the RCC 300 Freestanding Subwoofer is held in place with magnets. Simply position

the grille on the front of the subwoofer into the recessed area.