Artison RCC300-SM 설치 매뉴얼 - 페이지 10

{카테고리_이름} Artison RCC300-SM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artison RCC300-SM 15 페이지.

2. The Red Switch is the input voltage setting; select the appropriate 120V or 230V setting.

3. Connect the detachable IEC Power Cord underneath the Red Voltage Selection Switch.

AUDIO OUTPUTS

1. Connect the speaker wires to the Binding Posts.

NOTE: Red is Positive and Black is Negative.

2. Use either Bare Speaker Wire or Banana Plugs to terminate the speaker wire.

1. Connect to either the Balanced Female XLR or Unbalanced Female RCA Inputs.

NOTE: Both inputs have been calibrated to the same sensitivity level. Use a

Y-Adapter when using the Unbalanced RCA's for best performance.

AUDIO OUTPUTS

1. Connect to the Unbalanced Female RCA Outputs.

2. Set the High Pass Crossover to the desired frequency. The slope is set at 12 dB/octave.