DK-TEC SAVCDH 사용자 설명서 - 페이지 7
{카테고리_이름} DK-TEC SAVCDH에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK-TEC SAVCDH 15 페이지. Flail mower
페이지 인쇄
Before storing the machine for a long time, we recommend the following procedure:
•
Wash the machine carefully
•
Make a general check of the machine to locate possible structural lesions, note possible deep
darkening of the painting, verify that the original safety labels are present in their correct
position, that they are complete and legible
•
Lubricate all moving parts, e.g. the tension bolts, the connecting shaft to the PTO
•
If possible, wrap the machine in a covered room and place the machine on wooden boards on a
level
surface
The used oil must not be dispersed in the environment, because according to the effective legal
provisions it is
classified as special waste and as such it must be given to the special collection centre.
Important safety information
•
When using the machine, periodic checks and maintenance work are carried out in
accordance with what is stipulated in the effective safety regulations.
•
Failure to comply with the rules and basic safety precautions can lead to accidents during
work, maintenance and repair of the machine.
•
The flail mower is produced and designed exclusively for mowing grass. All other utility models
must be expressly approved by DK-TEC, otherwise the warranty will be void.
WARNING
•
DK-TEC is not responsible for any damage caused by an unexpected or insufficient use of
the machine.
•
The machine may only be used by authorized, trained persons who are aware of the
potential hazards. If in doubt, do not hesitate to contact us.
•
The instructions in this manual must be followed carefully.
Safety prevention
•
Carefully check the machine before switching it on
•
It is not possible to foresee all possible circumstances in which there may be a risk of a
potential hazard. The warnings in this manual are therefore not exhaustive - always use
your own logic when operating the machine.
•
Observe, in addition to the warnings in this manual, all the general safety and
accident prevention regulations. Do not operate the machine or perform
maintenance until the instructions have been read and understood.
•
The signals on the machine give a number of important indications: their observance is useful
for your safety.
•
Make sure all safety labels are legible. Clean them and replace them with new brands if
necessary.
5