DK-TEC AMC160 원본 사용자 설명서 - 페이지 7
{카테고리_이름} DK-TEC AMC160에 대한 원본 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK-TEC AMC160 10 페이지.
페이지 인쇄
VERY IMPORTANT! Never transport people on the towing unit or on the machine. Never allow the
person to stand too close to the machine!
IMPORTANT!
Never start the machine while it is pointing towards the user or other people. Always work with the
machine focused on the material to be cut.
•
Always have 5 meters of safe workplace around you.
•
Be sure that no one is accidentally at the place to be worked on.
•
When working on a public road with open traffic, safety signs must always be placed/
road triangle within the correct distance.
•
Pay attention to traffic and be prepared for sudden stops.
7. Maintenance of the hedge trimmer
When the hedge trimmer needs maintenance, it must always stand on a stable base to prevent it
from tipping over. Always replace worn and damaged parts immediately to avoid accidents.
Maintenance:
•
Lubricate all grease nipples at approx. every 18 working hours
•
After approx. 20 working hours, check that all bolts and nuts are tight.
Storage
•
Clean and check the machine for damage. If damage is found, it must be repaired before work
with the mower is started again.
•
Store the mower in an area that is free from people and children. Children must not play near
the machine.
•
Make sure the mower is on a stable surface to prevent it from tipping over.
•
Fit the safety cover on the cutting head when storing.
5