ALTUS Du351 제품 설명서 - 페이지 15
{카테고리_이름} ALTUS Du351에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALTUS Du351 18 페이지.
페이지 인쇄Duo Series
Doc. Code: CE113100
The controller must be installed in the panel, docking first the top.
After duly docked, the tabs must be opened (spinning, like described in the following figure) and the fixing bolts shall be tight
using a proper tool.
After these steps, the controller is mounted in Panel and you can start the field connection wiring. The terminal blocks located
on the back of equipment are identified by interfaces to which they belong. The terminal blocks are of screw type and they are
deployable, in order to facilitate the connection. The field wiring must be connected to the equipment without power sourcing, in
order to avoid electric shocks. After checking the connections, the equipment can be powered.
Altus S. A.
DU350, DU351
Revision: G
15