DK2 Power OPC503 조립 설명서 - 페이지 8

{카테고리_이름} DK2 Power OPC503에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPC503 13 페이지. Chipper shredder top loading
DK2 Power OPC503에 대해서도 마찬가지입니다: 조립 설명서 (15 페이지), 사용 설명서 (14 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄
DK2 Power OPC503 조립 설명서
Your Chipper is equipped with dual REVERSABLE cutting blades.
1. Turn engine key off, remove the key and unplug the spark
plug on the engine.
2. Remove the rear cover on the chipper housing
3. Before removing the bolts that mount the blades, place
paper towels in the area opening under the blade and the
drum housing. This will help to catch bolts from dropping
into the bottom of the drum housing.
4. Remove the first bolt.
5. Before removing the last bolt be sure to support the blade
from sliding down into the drum.
6. Remove the blade, reverse it to the new sharp edge and
reinstall it. Use only DK2 POWER OEM blades.
7. Use Loctite on the bolt threads when replacing bolts.
8. Remove the feed chute to access additional blades.
Step 2
Step 8
Step 4
Step 8
Step 5