DK2 Power OPC566E 사용자 설명서 - 페이지 5

{카테고리_이름} DK2 Power OPC566E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPC566E 17 페이지. Tips, tricks & frequent questions
DK2 Power OPC566E에 대해서도 마찬가지입니다: FAQ 시트 (13 페이지)

페이지 인쇄

Before using the wood chipper

NOTICE

A． Operators must be fully trained before using this machine.

B． User Manual is read and understood.

C． Machine is positioned on level ground; all guards are fitted and in good condition.

D． Blades are in good condition and secure. All blades are sharpened or replaced in sets.

E． All fasteners are checked for tightness.

F． Only WOODEN materials free of nails etc. are fed into the machine.

G． Emergency stop wire is rightly connected and the switch is functional.

H． Fire extinguisher is available on site.

When using the wood chipper

NOTICE

A. Always feed standing from the side of the feed chute.

B. It is better to have a second trained operator within easy reach of the machine.

C. Maintain strict discipline at all times and service machine at specified periods.

D. Note direction of discharge chute and if necessary, note the wind direction to prevent

debris from being blown or where it could affect members of the public.

E. DO NOT put any part of your body into the in-feed chute while the machine is running.

F. DO NOT operate the machine while under the influence of alcohol or drugs.

G. DO NOT operate inside a building or confined space or Climb on the in-feed chute.

Protecting Yourself and Those Around You

WARNING

This is a high-powered machine, with moving parts operating with high energy. You must

operate the machine safely. Unsafe operation can create several hazards for you, as well as

anyone else in the nearby area. Always take the following precautions when using this

machine:

A. Keep in mind that the operator or user is responsible for accidents or hazards occurring

to other people, their property, and themselves.

Always wear protective goggles or safety glasses with side shields while using the Wood

Chipper to protect your eyes from possible thrown debris.

C. Avoid wearing loose clothing or jewelry, which can catch on moving parts.

D. We recommend wearing gloves while using the Wood Chipper. Be sure your gloves fit

properly and do not have loose cuffs or drawstrings.

Wear shoes with non-slip treads when using your Wood Chipper. If you have safety

shoes, we recommend wearing them. Do not use the machine while barefoot or wearing

open sandals.

Wear long pants while operating the Wood Chipper.

G. Always keep bystanders at least 50 feet away from your work area . Stop the engine

when another person or pet approaches.

Part I: General Safety Rules