DK2 Power OPS240 사용자 설명서 - 페이지 11

{카테고리_이름} DK2 Power OPS240에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPS240 19 페이지. 40 ton kinetic splitter

Stopping

Move the Throttle Lever to IDLE.

Recoil Start: Turn the Ignition Switch to the OFF position.

Electric Start: Turn the Key to the OFF position.

Operator Zone

Log Splittering

NOTICE

All logs should be no longer than 24".

WARNING

Do not place your hands on the ends of the log when loading the Log Splitter. This is a very

UNSAFE method and could result in injury to your hands.

Do not reach or step across the rail while the Log Splitter is running. This is a very UNSAFE

method which could cause personal injury, even death.

Do not reach forward and attempt to catch the split wood As the log is being split - let it fall

to the ground.

CAUTION

Never attempt to split wood across the grain. The Log Splitter was not designed for

cross-grain splitting. Doing so could damage the Log Splitter and may cause personal injury.

Make sure both ends of the log that you are splitting are cut as square as possible. This will

prevent the log from sliding out of position when under pressure

Part III: Operating The Log Splitter