DK2 Power OPS240 사용자 설명서 - 페이지 6

{카테고리_이름} DK2 Power OPS240에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPS240 19 페이지. 40 ton kinetic splitter

C. Replace rubber fuel lines and grommets when worn or damaged and after 5 years of

use.

D. Fill the gasoline tank outdoors with the engine off and allow the engine to cool

completely. Don't handle gasoline if you or anyone nearby is smoking, or if you're near

anything that could cause it to ignite or explode. Reinstall the fuel tank cap and fuel

container cap securely.

If you spill gasoline, do not attempt to start the engine. Move the machine away from

the area of the spill and avoid creating any source of ignition until the gas vapors have

dissipated. Wipe up any spilled fuel to prevent a fire hazard and properly dispose of the

waste.

Allow the engine to cool completely before storing in any enclosure. Never store a

machine that has gas in the tank, or a fuel container, near an open flame or spark such

as a water heater, space heater, clothes dryer or furnace.

G. Never make adjustments or repairs with the engine running. Shut down the engine,

disconnect the spark plug wire, keeping it away from the spark plug to prevent

accidental starting, wait 5 minutes before making adjustments or repairs.

H. Never tamper with the engine's governor setting. The governor controls the maximum

safe operation speed and protects the engine. Over-speeding the engine is dangerous

and will cause damage to the engine and to the other moving parts of the machine. If

required, see your authorized dealer for engine governor adjustments.

Keep combustible substances away from the engine when it is hot.

Never cover the machine while the muffler is still hot.

K. Do not operate the engine with the air cleaner or the carburetor air intake cover

removed. Removal of such parts could create a fire hazard. Do not use flammable

solutions to clean the air filter.

The muffler and engine become very hot and can cause a severe burn; do not touch.

General Safety

WARNING

Operating this Log Splitter safely is necessary to prevent or minimize the risk of death or

serious injury. Unsafe operation can create a number of hazards for you. Always take the

following precautions when operating this Log Splitter:

A. Your Log Splitter is a powerful tool, not a plaything. Exercise extreme caution at all

times. The machine is designed to split logs. Do not use it for any other purpose.

Know how to stop the Log Splitter quickly; see "stopping the engine" in Part III.

C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to

avoid slipping or falling.

D. See manufacturer's instructions for proper operation and installation of accessories.

Never use the machine without ensuring that all guards and shields are in place.

Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard

parts on the Log Splitter. This includes all shields and guards. Modifications to your

Part I: General Safety Rules