Altuscn KN1000 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Altuscn KN1000에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altuscn KN1000 2 페이지. Kvm over the net

페이지 인쇄

Installation

To install the KN1000, refer to the installation diagrams (the numbers correspond to the numbers of

the steps), and do the following:

1. Ground the unit using the grounding wire provided with the KN1000 package.

2. Use the Console cable provided with this package to connect the KN1000's Console port, to the

local console keyboard, monitor and mouse.

Note: 1. The Console cable comes with connectors for both PS/2 and USB mice and keyboards –

use the ones appropriate for your installation.

2. You can use any combination of keyboard and mouse connections. For example, you can

use a PS/2 keyboard with a USB mouse.

3. Use the KVM cable provided with this package to connect the KN1000's PC/KVM port, to the

keyboard, video and mouse ports of the server or KVM switch that you are installing

4. (Optional) If you want to use the virtual media function, use the USB 2.0 Virtual Media Cable

provided with this package to connect a USB port on the server to the KN1000's Virtual Media

port.

5. (Optional) If you want to connect a PON device for remote power management, plug its cable into

the PON port.

6. (Optional) If you want to connect a serial console device or modem, plug its cable into the RS-232

port.

7. Plug the LAN or WAN cable into the KN1000's LAN port.

8. Use the outlet power cord provided with the KN1000 package to connect the KN1000's Power

Outlet to the attached server for power management.

9. Use the power cord from the server to connect the KN1000's Power Inlet to an AC power source.

10. Plug the power adapter cable into the KN1000's power jack, then plug the power adapter into an

AC power source.

This completes the hardware installation, and you are ready to start up.

Note: When starting up, be sure to first power on the KN1000, then power on the server or KVM

switch.

Modem

PN0108

7-1

Operation

The KN1000 can be accessed either from an internet type browser, via Windows and Java application

(AP) program, or by PPP modem dial-in.

Logging In

To operate the KN1000 from an Internet browser, begin by logging in:

1. Open your browser and specify the IP address of the KN1000 you want to access in the browser's

URL location bar.

Note: For security purposes, a login string may have been set by the administrator. If so, you must

include a forward slash and the login string along with the IP address when you log in. For

example:192.168.0.100/ KN1000 If you don't know the IP address and login string, ask

your Administrator. The default IP address is 192.168.0.60

2. A Security Alert dialog box appears. Accept the certificate – it can be trusted. If a second certificate

appears, accept it as well.

The KN1000 login page appears:

3. Provide a valid Username and Password (set by the KN1000 administrator), then click Login to

continue.

Note: 1. If you are the administrator, and are logging in for the first time, use the default Username:

administrator; and the default Password: password. For security purposes, we strongly

recommend you remove these and give yourself a unique Username and Password.

2. If you supplied an invalid login, the authentication routine will return this message: Invalid

Username or Password. Please try again. If you see this message, log in again being careful

with the Username and Password.

Serial Console Device

After you have successfully logged in, the KN1000 Main Screen appears

(Router, Switch, Sun re V100,....)

7-2

Operation

Mouse Setup

If you use a PS/2 custom KVM cable to connect to the server, perform the following mouse setting

procedures.

Windows Systems:

Note: You must use the generic mouse driver supplied with Windows.

• XP / Server 2003 -- middle position; Enhance pointer precision: off

• 2000 / ME -- Mouse motion: middle position; Acceleration: off

• NT / 98 / 95 -- Mouse speed: slowest

Sun / Linux Systems:

Open a terminal session and issue the following command:

• Sun: xset m 1

• Linux: xset m 0 or xset m1 (if one doesn't work try the other.)

Specifications

Function

Console

1 x SPHD-18 Male (Yellow)

KVM (Computer)

1 x SPHD-17 Female (Yellow)

PON

1 x DB-9 Male (Black)

RS-232

1 x DB-9 Male (Black)

Connectors

LAN

Power Inlet

Power Outlet

Power

Virtual Media

1 x USB Mini-B Female (Black)

Switches

Reset

1 x Semi-recessed pushbutton

Power

Power Outlet

LEDs

Link

10/100 Mbps

Emulation

Keyboard/Mouse

Video

1600 x 1200 @ 60 Hz; DDC2B

I/P Rating

100–240 VAC; 50/60 Hz, 10A

Load Capacity

120V/1200W; 230V/2300W

O/P Rating

100–240 VAC; 50/60 Hz; 9A

DC Input Rating

Power Consumption

Operating Temp.

Environment

Storage Temp.

Humidity

0–80% RH Non-condensing

Housing

Physical Properties

Weight

Dimensions (L x W x H)

30.85 x 8.15 x 4.20 cm

Power Over the NET™

KN1000

1 x RJ-45 Female

1 x IEC320 C14

1 x IEC320 C13

1 x DC Jack

1 (Orange)

1 (Green)

1 (Orange/Green)

USB; PS/2

DC5.3V;2.4A

DC5.3V; 6.3W

0–40℃

-20–60℃

Metal

0.86 kg