Customatic SQUIRE 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Customatic SQUIRE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Customatic SQUIRE 16 페이지. Adjustable bed frame

Attaching the bed legs

Take out the adjustable bed legs from the accessory box.

Thread the bed legs into the pre-drilled holes on the bed

frame by turning them in a clockwise direction.

Tighten the legs securely to the frame.

NOTE:

Do not overtighten the bed legs.

Adjust the legs to the desired height by twisting either

clockwise or counterclockwise.

IMPORTANT!

Make sure all legs are adjusted to the same height.

Setting up the electronics

FOR KING AND CAL KING MODELS

Plug the foot lift cord into the control box. Insert it into the port labeled

"Foot Actuator".

FOR ALL MODELS

Remove and extend the power cord from the frame.

Turn the bed frame over carefully so the top side is now facing

upward. Do not rest the frame on its side. The weight may damage

the legs.

Plug the power cord into a grounded electrical outlet.

NOTE:

For optimal safety, using a surge protector (not included) is

highly recommended.

Install batteries in the remote control. Try all functions on the

remote to make sure all features are operational.

NOTE:

If the bed does not work, see the Troubleshooting section

of this manual.

Return bed to flat position before continuing with the installation.

Installation Guide

Make sure power

cords do not obstruct

any adjustable bed

IMPORTANT!

mechanisms.